R&Y Garage Door Repair’s Top Tips: Fixing 10 Common Garage Door Problems in Brushy Creek, Texas

R&Y Garage Door Repair Services

R&Y Garage Door Repair We’ve all experienced common garage door problems. If you’ve noticed your garage is making a lot of noise, looking uneven or performing at a slower rate than usual, there’s probably a thing or two you can do to fix it.

If you’re experiencing garage door issues, we’ve laid out some standard solutions and highlighted when you should contact a professional for further assistance.

1. Trouble Opening or Closing

When your garage door becomes a hindrance rather than a convenience, it’s time to troubleshoot. Don’t fret—there are a few do-it-yourself solutions you can attempt.

Check for Balance

An imbalanced door can cause operational problems. Disconnect the power source and manually lift the door to test its balance. If it remains in position, it’s well-balanced and on the right track. Otherwise, an underlying issue may exist.

Another possible culprit is a blown fuse. If you’ve confirmed that all batteries are functional but the door remains motionless, a blown fuse might be the cause. However, if other lights in your home are still working, the problem may lie with the door opener itself.

If you’ve exhausted these quick troubleshooting steps and your garage door still refuses to cooperate, it’s time to seek professional assistance for reliable garage door repairs.

2. Obstructed Sensors

When your garage door refuses to cooperate, it’s possible that some sensors are obstructed or covered.

Clear the Path for Signals

To ensure seamless operation between your remote and the door, it’s important to identify and remove any obstacles that may be blocking signals.

Inspect the area around the sensor to ensure there are no branches or plants obstructing its line of sight.

Additionally, check the antenna for any dirt or debris that could be interfering with the signal. Sometimes, the antenna may have become misaligned, which can be easily fixed by readjusting it.

3. Broken Springs

When extension or torsion springs snap, your garage door can drop quickly.

Get New Springs

The springs in your system will tap out after performing so many cycles, causing them to snap. Keep your springs’ lifespan in mind, and contact a professional to replace them when necessary. If your springs snap while in use, your door can slam down and cause damage to your vehicle or harm another person.

If you hear your springs snap when not in use, do not try to open your garage because the system can fire the springs off as projectiles and cause injury.

4. Roller Issues

The rollers in your system will last for different periods depending on whether they are plastic, steel or nylon.

Refresh or Replace

Old or rusted rollers can cause problems with opening your door. The first thing you’ll want to do is lubricate them. If they are still causing issues, you may need to replace them.

Rollers will typically only work until they reach their max cycle limit. Keep track of when your rollers are coming up on the end of their limitation to ensure you can replace your rollers seamlessly.

5. Dying Opener

Your garage door opener allows you to utilize your garage efficiently every time you need it. If your opener is 20 years old or more, it’s likely outlived its lifespan.

Update and Replace

Do some garage door opener troubleshooting by checking the batteries, getting within proximity of the garage and clearing the path of your antenna.

If you’re still experiencing issues with your opener, the likely culprit is a dying motor. If your motor is old or overheating, it won’t respond the way it should.

You should always hire a professional to install a garage door opener to ensure you don’t harm yourself or others or damage your door.

6. Unusual Noises

Hearing a series of unusual noises is a huge indicator you have an underlying issue. Some may be minor, while others require immediate and professional attention.

When To Repair And When To Replace?

Snap, Crackle, Pop

Your door may make a variety of noises depending on the issue. Some issues and noises they might produce include:

• Loose chains: slapping
• Loose rollers: grinding, squeaking and squealing
• Loose nuts and bolts: vibrating and rattling
• Rust: clinking
• Broken springs: popping and rumbling
• Alignment: banging, straining, scraping and rubbing

If you’re unsure about the sound you’re hearing or where it’s coming from, it is best to contact a professional to conduct garage door troubleshooting.

7. Uneven Door

Sometimes you’ll notice that your door is looking odd or moving unevenly. In this case, there are a few areas to check.

Fix Alignment

Sometimes an uneven door is caused by something blocking the way, so make sure you’ve removed all obstacles from the door’s path.

Rust can cause one side of your door to move faster than another. A good wipe-down can sometimes fix this issue.

You can also check your manual to ensure you’ve all of your limits on the appropriate settings, which will help to make sure the door fully closes and doesn’t malfunction.

If the problem lies in the spring system, be sure to contact a professional and limit your door use. Snapped springs can be hazardous and cause serious injury.

8. Slow Opening

Slowly opening doors can easily be a source of frustration, and there are a few reasons it might be happening.

Clean and Lubricate

You want to examine your rollers to ensure they aren’t dried out. You’ll also want to evaluate the condition of your tracks. If you notice a lot of dirt, you’ll need to clean them off.

Keeping your tracks and rollers well lubricated will ensure they continue to move smoothly. These parts are more susceptible to drying out faster in places where the weather gets extremely hot or cold.

As a general rule of thumb, plan to give your system regular maintenance at least twice a year.

9. Transmitter Problems

Your remote control should be able to open your garage door effortlessly, but sometimes this doesn’t always happen.

Replace Batteries

Fixing your transmitter problems is a quick fix that typically involves a simple battery change.

First, you’ll want to test the transmitter inside your garage to know where your problem lies. If the door doesn’t open, you have an underlying problem. However, if it does open, your batteries are probably dead.

Changing the batteries usually involves removing the back of the remote (in some cases with a screwdriver). You always want to ensure the batteries face the correct direction to avoid thinking a problem lies elsewhere when the remote doesn’t work.

10. Keypad Not Synced

A garage keypad offers security and comfort for many homeowners. If your door isn’t opening when you type in your code, it’s likely not synced.

Refer to the Manual

Syncing your keypad is a simple fix that you can do in minutes.

First, you should check the batteries. There’s a chance they’ve died, meaning you need a quick change.

Next, you’ll need to refer to the user manual to know what steps to take to sync the keypad and remote properly. If you have persisting issues, you can call your manufacturer for more information.

Reliable Repairs With R&Y Garage door repair

When you choose R&Y Garage Door Repair, you get more than exceptional service. We bring you the finest door brands and unmatched workmanship. By using only the highest quality doors, we ensure that your garage operates promptly and safely. Explore testimonials from our delighted customers in Taylor, Austin, and surrounding areas, and experience the same-day service by scheduling a repair with us.

R&Y Garage Door Repair can handle all of your commercial and residential garage door installation and repairs.

Anytime you need us, 24 hours a day, we’ll be there to take care of you. Fill out the contact form below to reach us via email or call us at (512) 736-7290